Modular chiller is a conditioning system, which doesn’t require the assemblage. It decently simplifies the time taking process of installation. They are often used in large production shops, hotels, factories and other large objects. Due to high efficiency and reliability of operation, Menergy chillers are very popular not only on the territory of Uzbekistan, but also throughout Uzbekistan.  Despite high parameters of reliability and quality, technologic appearance, they are sold at affordable prices.

Properties of the equipment:

  • Modular type of assemblage provides the addition or removal of certain elements when it is necessary. It depends on the customer’s wisher or required indicators.
  • Heat exchanger of V-type extends the indicators of heat exchange more than 30 %. It is higher in comparison with other heat exchangers. The growth of heat exchange indicators is provided due to innovative technologies of heat exchanger protection (license ZL 2010 2 0243062.2).
  • The use of modern materials provides a high resistance to aggressive environment. It is also used hydrophilic antiseptic aluminum foil.
  • In comparison with other many chillers, during the operation of which the usual compressors are used, these devices have a high noise insulation. This is due to the fact that Menergy chillers are equipped with hermetic spiral compressor.
  • These chillers are also equipped with the function of remote control that simplifies the operation of this system. Remote control can be done by means of internet or telephone. However, for this purpose, it is necessary to install a special software.
  • Function of heat recuperation, supply of hot water.

If you need the installation of modular chillers in Tashkent, contact Server Service Company. Call us by one of the telephone numbers listed in the section “Contacts”.

Technical parameters:

For heat pump chiller 68Kw module

Model MLS(R)F-
68
MLS(R)F-
136
MLS(R)F-
204
MLS(R)F-
272
MLSF-
273
MLS(R)F-
340
MLS(R)F-
408
Connection (Main + Additional module) 1+0 1+1 1+2 1+3 1+4 1+5
Nominal cooling capacity kW 68 136 204 272 272 340 408
EER 3.09 3.09 3.09 3.09 3.09 3.09 3.09
USRT 19.5 39 58.3 78 78 97 117
Nominal heating capacity kW 72.5* 145* 217.5* 290* 290 362.5* 435*
USRT 21* 41.5* 62* 83* 103.6* 124*
Electric parameters 380~420/3/50
Compressor Type Hermetic scroll compressor
Quantity 4 8 12 16 20 24
Power consumption kW 22 44 66 88 88 110 132
Safe Protection Device High/low pressure switch,overload protection,counter clockwise and short phase protection(power phases sequence protection),lack water(water-flow switch),anti-freeze protection,ect
Side of air (Compressor) Type Copper-fin-coil
Side of water (Evaporator) Type Shell and tube  heat exchanger
Water consumption m3/h 11.7 23.4 35.1 46.8 46.8 58.5 70.2
Water pressure drop kPa 40-50
Max.pressure MPa 1
Connection type of water pipe Soft connection
Dimensions Width mm 2065
Length mm 1030 2060+n 3090+2n 4120+3n 4120+4n 5150+4n 6180+5n
Height mm 1974
Noise level db(A) 65 66 67 68 68 69 70
Refrigerant Type R410A
Volume kg 3.8×4 3.8×8 3.8×12 3.8×16 3.8×17 3.8×20 3.8×24
Weight kg 840 1680 2520 3360 3360 4200 5040
Control Wired controller

Attention:

  • Cooling regime: temperature of chilled water inlet/outlet 12℃(53.6℉)/7℃(44.6℉); air temperature on dry/wet thermometer 35℃(95℉)/24℃(75.2℉).
  • Heating regime: temperature of hot water inlet/outlet 40℃(104℉)/ 45℃(113℉); air temperature on dry/wet thermometer 7℃(44.6℉)/6℃(42.8℉).
  • Letter “n” indicates regular interval between units
  • Power of pump are chosen in accordance with the requirements of particular object.
  • All the models of this equipment are equipped with the function of heat recuperation. Its efficiency is up to 40% by request.
  • Accessories: wired controller and switch of water flow for connection.
  • Menergy reserves the right to update the parameters, please refer to the table.

 

Technical parameters:

For heat pump chiller 68Kw module

Model MLS(R)F-
68
MLS(R)F-
136
MLS(R)F-
204
MLS(R)F-
272
MLSF-
273
MLS(R)F-
340
MLS(R)F-
408
Connection (Main + Additional module) 1+0 1+1 1+2 1+3 1+4 1+5
Nominal cooling capacity kW 68 136 204 272 272 340 408
EER 3.09 3.09 3.09 3.09 3.09 3.09 3.09
USRT 19.5 39 58.3 78 78 97 117
Nominal heating capacity kW 72.5* 145* 217.5* 290* 290 362.5* 435*
USRT 21* 41.5* 62* 83* 103.6* 124*
Electric parameters 380~420/3/50
Compressor Type Hermetic scroll compressor
Quantity 4 8 12 16 20 24
Power consumption kW 22 44 66 88 88 110 132
Safe Protection Device High/low pressure switch,overload protection,counter clockwise and short phase protection(power phases sequence protection),lack water(water-flow switch),anti-freeze protection,ect
Side of air (Compressor) Type Copper-fin-coil
Side of water (Evaporator) Type Shell and tube  heat exchanger
Water consumption m3/h 11.7 23.4 35.1 46.8 46.8 58.5 70.2
Water pressure drop kPa 40-50
Max.pressure MPa 1
Connection type of water pipe Soft connection
Dimensions Width mm 2065
Length mm 1030 2060+n 3090+2n 4120+3n 4120+4n 5150+4n 6180+5n
Height mm 1974
Noise level db(A) 65 66 67 68 68 69 70
Refrigerant Type R410A
Volume kg 3.8×4 3.8×8 3.8×12 3.8×16 3.8×17 3.8×20 3.8×24
Weight kg 840 1680 2520 3360 3360 4200 5040
Control Wired controller

Attention:

  • Cooling regime: temperature of chilled water inlet/outlet 12℃(53.6℉)/7℃(44.6℉); air temperature on dry/wet thermometer 35℃(95℉)/24℃(75.2℉).
  • Heating regime: temperature of hot water inlet/outlet 40℃(104℉)/ 45℃(113℉); air temperature on dry/wet thermometer 7℃(44.6℉)/6℃(42.8℉).
  • Letter “n” indicates regular interval between units
  • Power of pump are chosen in accordance with the requirements of particular object.
  • All the models of this equipment are equipped with the function of heat recuperation. Its efficiency is up to 40% by request.
  • Accessories: wired controller and switch of water flow for connection.
  • Menergy reserves the right to update the parameters, please refer to the table.

 

For heat pump chiller 90kW module

Model MLS(R)F-
90
MLS(R)F-
180
MLS(R)F-
270
MLSF-
360
MLSF-
361
MLSRF-
362
MLS(R)F-
450
MLS(R)F-
540
Connection (Main + Additional module) 1+0 1+1 1+2 1+3 1+3 1+4 1+5
Nominal cooling capacity kW 90 180 270 360 360 360 450 540
EER 3.03 3.03 3.03 3.03 3.03 3.03 3.03 3.03
USRT 26 75 77 103 103 103 129 154
Nominal heating capacity kW 95* 190* 285* 380 380 475* 570*
USRT 27* 54.3* 82* 109 136* 163*
Electric parameters 380~420/3/50
Compressor Type Hermetic scroll compressor
Quantity 6 12 18 24 24 30 36
Power consumption kW 29.75 59.5 89.25 119 119 119 148.75 178.5
Safe Protection Device High/low pressure switch,overload protection,counter clockwise and short phase protection(power phases sequence protection),lack water(water-flow switch),anti-freeze protection,ect
Side of air (Compressor Type Copper-fin-coil
Water side (evaporator) Type Shell and tube heat exchanger
Water consumption m3/h 15.5 31 46.5 62 62 62 77.5 93
Water pressure drop kPa 40-50
Max.pressure MPa 1
Connection type of water pipe Soft connection
Dimensions Width mm 2700
Length mm 1030 2060+n 3090+2n 4120+3n 4120+4n 4120+3n 5150+4n 6180+5n
Height mm 1820
Noise level db(A) 71 72 72 72 72 73 74
Refrigerant Type
Volume kg 4×6 4×12 4×18 4×24 4×25 4×24 4×30 4×36
Weight kg 2400 3600 4800 4800 4800 6000 7200
Control Wired controller

Attention:

  • Cooling regime: temperature of chilled water inlet/outlet 12℃(53.6℉)/7℃(44.6℉); air temperature on dry/wet thermometer 35℃(95℉)/24℃(75.2℉).
  • Heating regime: temperature of hot water inlet/outlet 40℃(104℉)/ 45℃(113℉); air temperature on dry/wet thermometer 7℃(44.6℉)/6℃(42.8℉).
  • Letter “n” indicates regular interval between units
  • Power of pump are chosen in accordance with the requirements of particular object.
  • All the models of this equipment are equipped with the function of heat recuperation. Its efficiency is up to 40% by request.
  • Accessories: wired controller and switch of water flow for connection.
  • Menergy reserves the right to update the parameters, please refer to the table.

 

For heat pump chiller 102kW module

Model MLS(R)F-
102
MMLS(R)F-
204
MLSRF-
306
MMLS(R)F-
408
MLS(R)F-
409
Connection (Main +Additional module) 1+0 1+1 1+2 1+3
Nominal cooling capacity kW 102 204 306 408 408
EER 3.09 3.09 3.09 3.09 3.09
USRT 29 58.3 87.5 117 117
Nominal heating capacity kW 108* 216* 324* 408* 432
USRT 31* 62* 93* 117*
Electric parameters 380~420/3/50
Compressor Type Hermetic scroll compressor
Number 6 12 18 24 132.2
Cooling input power kW 33.05 66.1 99.15 132.2 132.2
Protection features Hermetic scroll compressor
Air side (condenser) Type Copper-fin-coil
Compressor Type Shell and tube heat exchanger
Water consumption m3/h 17.5 35 52.5 70 70
Water pressure drop kPa 60
Max.pressure MPa 1
Connection type of water pipe Soft connection
Dimensions Width mm 3000
Length mm 1030 2060+n 3090+2n 4120+3n 4120+4n
Height mm 2062
Noise level db(A) 71 72 73 74 74
Refrigerant Type R410A
Volume kg 4×6 4×12 4×18 4×24 4×25
Weight kg 1350 2700 4050 5400 5400
Control Wired controller

Attention:

  • Cooling regime: temperature of chilled water inlet/outlet 12℃(53.6℉)/7℃(44.6℉); air temperature on dry/wet thermometer 35℃(95℉)/24℃(75.2℉).
  • Heating regime: temperature of hot water inlet/outlet 40℃(104℉)/ 45℃(113℉); air temperature on dry/wet thermometer 7℃(44.6℉)/6℃(42.8℉).
  • Letter “n” indicates regular interval between units
  • Power of pump are chosen in accordance with the requirements of particular object.
  • All the models of this equipment are equipped with the function of heat recuperation. Its efficiency is up to 40% by request.
  • Accessories: wired controller and switch of water flow for connection.
  • Menergy reserves the right to update the parameters, please refer to the table.