Heat Pump Water-Water
A distinctive feature of horizontal heat pumps is their shape and installation method. The dimensions of horizontal heat pumps range from 960×615 ×730 to 1500×1000×1450 depending on the power of the unit.
Product features:
1
Due to the fact that the coaxial heat exchanger has a large diameter, the device guarantees high heat transfer efficiency. Also, the reliability of operation and high frost resistance.
2
The technology of gradual wear reduces the electrical impulse, thereby increasing the durability of this installation.
3
Modular technology.
4
A microcomputer is installed in the equipment, which performs control. The control interface on the large LCD display allows you to use the system without much difficulty.
5
In addition to the control on the device itself, there is also the possibility of remote control via the Internet or phone.
6
Silent operation is ensured by unique anti-vibration developments for compressors (Patent ZL 2020 2,024,3049.7) and the use of modern noise-absorbing materials.
7
Refrigerating agents R410a, R407C, R134a, R22
8
The device has a heat recovery function.
9
The developed method of control of the mobile unit (patent ZL 2020 2,024,3049.7) Facilitates the installation, detection, operation and maintenance of horizontal TN.
Below is a detailed technical description of each model of these units. Based on the parameters below, you can make a choice in favor of one or another model, based on certain conditions. However.
Technical parameters
Parameters (Water Loop)
| Model | MSSH(R)- 7500 | MSSH(R)- 10000 | MSSH(R)- 12000 | MSSH(R)- 15000/S | MSSH(R)- 20000/S | MSSH(R)- 25000/S | |
| Cooling capacity(KW) | 7.9 | 9.8 | 11.7 | 14.5 | 18.5 | 23.6 | |
| EER | 4.16 | 4.36 | 4.43 | 4.43 | 4.83 | 4.47 | |
| Cooling capacity(USRT) | 2.15 | 2.9 | 3.5 | 4.15 | 5.6 | 7.15 | |
| Heating capacity(KW) | 8.9 | 12 | 15 | 17.5 | 21 | 28 | |
| COP | 4.24 | 4.75 | 4.95 | 4.71 | 4.72 | 4.95 | |
| Heating capacity(USRT) | 2.55 | 3.5 | 4.3 | 5 | 6.6 | 8.3 | |
| Incoming cooling power(KW) | 1.9 | 2.25 | 2.64 | 3.27 | 3.83 | 5.28 | |
| Incoming heating power(KW) | 2.1 | 2.8 | 3.21 | 4.14 | 4.87 | 6.42 | |
| Electrical parameters (V/Ph/Hz) | 230/1/50 | 380~420/3/50 | |||||
| Incoming cooling current(A) | 8.6 | 4.4 | 5 | 6.1 | 6.9 | 10 | |
| Incoming current in the heating(A) | 9.5 | 5.3 | 6 | 7.3 | 8.5 | 12 | |
| Compressor Type | Rotary | Spiral | |||||
| Type of refrigerant | R410A | ||||||
| Overall dimensions( L*W*H) (mm) | 960×615 ×730 | 930×600× 840 | 1000×600× 900 | 1050×655× 810 | 1100×705× 850 | 1150×700× 770 | |
| Side of the heat source | Water resistance(kPa) | 28 | 28 | 31 | 34 | 38 | 45 |
| Pipe dimensions | R1(DN25) | R1-1/4(DN25) | |||||
| Water consumption (m3h) | 1.6 | 2.2 | 2.6 | 3.2 | 4.2 | 5.4 | |
| Side of use | Water resistance(kPa) | 26 | 27 | 29 | 33 | 33 | 33 |
| Pipe dimensions | R1(DN25) | R1-1/4(DN25) | |||||
| Water consumption(m3h) | 1.3 | 1.7 | 2.1 | 2.6 | 3.4 | 4.3 | |
| Noise leveldB(A) | 50 | 52 | 54 | 56 | 58 | 58 | |
| Weight (kg) | 85 | 100 | 105 | 120 | 150 | 250 | |
| Power Wire | YZW 3×2.5 | YZW 3×4 | YZW 4×4+1×1.5 | ||||
Attention:
- Cooling mode: the temperature of the cooling water at the inlet/outlet is 12℃/7℃; the water temperature at the inlet/outlet of the water loop is 30℃/35℃
- Heating mode: the temperature of the heated water at the inlet/outlet is 40°/45°; the water temperature at the inlet/outlet of the water loop is 15°/9°
- Menergy reserves the unique right to update the parameters, please refer to the sign
Parameters (Water Loop)
| Model | MSSH(R)- 30000/S | MSSH(R)- 40000/S | MSSH(R)- 50000/S | MSSH(R)- 60000/S | MSSH(R)- 80000/S | |
| Cooling capacity(KW) | 29.2 | 37.1 | 49.3 | 54.2 | 73.2 | |
| EER | 4.46 | 4.71 | 4.40 | 4.61 | 4.62 | |
| Cooling capacity(USRT) | 9 | 12 | 15 | 17 | 23 | |
| Heating capacity(KW) | 39 | 46 | 67.4 | 72.1 | 97.3 | |
| COP | 4.71 | 4.72 | 5.34 | 5.22 | 5.02 | |
| Heating capacity(USRT) | 10 | 13 | 16 | 18 | 24 | |
| Incoming cooling power(KW) | 6.54 | 7.88 | 11.2 | 11.76 | 15.86 | |
| Incoming heating power(KW) | 8.28 | 9.74 | 12.61 | 13.8 | 19.4 | |
| Electrical parameters (V/Ph/Hz) | 380~420/3/50 | |||||
| Incoming cooling current(A) | 12.9 | 13.8 | 19.8 | 20.7 | 27.6 | |
| Incoming current in the heating(A) | 14.6 | 17.1 | 22.6 | 24.4 | 33.8 | |
| Compressor Type | Spiral | |||||
| Type of refrigerant | R410A | |||||
| Overall dimensions( L*W*H) (mm) | 1150×700×770 | 1150×700×960 | 1450×874×1302 | 1600×874×132 | 1500×1000×1450 | |
| Side of the heat source | Water resistance(kPa) | 65 | 70 | 85 | 85 | 90 |
| Pipe dimensions | R1-1/2(DN40) | R2(DN50) | R2-1/2(DN65) | |||
| Water consumption (m3h) | 6.2 | 8.6 | 10.7 | 12.2 | 16.8 | |
| Side of use | Water resistance(kPa) | 34 | 35 | 45 | 45 | 55 |
| Pipe dimensions | R1-1/2(DN40) | |||||
| Water consumption (m3h) | 4.9 | 6.8 | 8.6 | 9.8 | 13.4 | |
| Noise level dB(A) | 58 | 62 | 63 | 65 | 67 | |
| Weight (kg) | 280 | 300 | 420 | 450 | 700 | |
| Power wire | YZW 4×4+1×1.5 | YZW 4×6+1×4 | YZW 4×10+1×6 | |||
Attention:
- Cooling mode: the temperature of the cooling water at the inlet/outlet is 12℃/7℃; the water temperature at the inlet/outlet of the water loop is 30℃/35℃
- Heating mode: the temperature of the heated water at the inlet/outlet is 40℃(/45℃; the water temperature at the inlet/outlet of the water loop is 15℃/9℃
- Menergy reserves the unique right to update the parameters, please refer to the sign
Parameters (Geothermal Loop)
| Model | MSSM(R)- 7500 | MSSM(R)- 10000 | MSSM(R)- 12000 | MSSM(R)- 15000/S | MSSM(R)- 20000/S | MSSM(R)- 25000/S | |
| Cooling capacity(KW) | 8.1 | 10.1 | 12.4 | 14.8 | 19.5 | 24.8 | |
| EER | 5.23 | 5.08 | 5.28 | 5.07 | 5.56 | 5.28 | |
| Cooling capacity(USRT) | 2.2 | 3 | 3.55 | 4.3 | 5.8 | 7.4 | |
| Нeating capacity(KW) | 8.2 | 10.3 | 12.6 | 15.5 | 20.4 | 25.3 | |
| COP | 4.10 | 3.68 | 3.77 | 3.66 | 4.11 | 3.83 | |
| Нeating capacity(USRT) | 2.2 | 3 | 3.66 | 4.26 | 5.6 | 7.06 | |
| Incoming cooling power(KW) | 1.55 | 1.99 | 2.35 | 2.92 | 3.51 | 4.7 | |
| Incoming heating power(KW) | 2 | 2.8 | 3.34 | 4.23 | 4.96 | 6.6 | |
| Electrical parameters (V/Ph/Hz) | 230/1/50 | 380~420/3/50 | |||||
| Incoming cooling current(A) | 7.2 | 4.1 | 4.4 | 5.6 | 6.3 | 8.3 | |
| Incoming current in the heating(A) | 9.2 | 5.3 | 6.3 | 7.5 | 8.7 | 12.6 | |
| Compressor type | Rotary | Spiral | |||||
| Type of refrigerant | R410A | ||||||
| Overall dimensions( L*W*H) (mm) | 960×615× 730 | 930×600× 840 | 1000×600× 900 | 1050×655× 810 | 1100×705× 850 | 1150×700× 770 | |
| Side of the heat source | Water resistance(kPa) | 28 | 28 | 31 | 34 | 38 | 45 |
| Pipe dimensions | R1(DN25) | R1-1/4(DN25) | |||||
| Water consumption (m3h) | 1.6 | 2.1 | 2.6 | 3.1 | 4.2 | 5.3 | |
| Side of use | Water resistancekPa) | 26 | 27 | 29 | 33 | 33 | 33 |
| Pipe dimensions | R1(DN25) | R1-1/4(DN25) | |||||
| Water consumption (m3h) | 1.3 | 1.8 | 2.1 | 2.6 | 3.5 | 4.4 | |
| Noise leveldB(A) | 50 | 52 | 54 | 56 | 58 | 58 | |
| Weight (kg) | 85 | 100 | 105 | 120 | 150 | 250 | |
| Power wire | YZW 3×2.5 | YZW 3×4 | YZW 4×4+1×1.5 | ||||
Attention:
- Cooling mode: the temperature of the cooling water at the inlet/outlet is 12℃/7℃; the water temperature at the inlet/outlet of the water loop is 30℃/35℃
- Heating mode: heated water inlet/outlet temperature 40℃/45℃; water temperature at the inlet/outlet of the water loop 10℃/9℃
- Menergy reserves the unique right to update the parameters, please refer to the sign
| Model | MSSM(R)- 30000/S | MSSM(R)- 40000/S | MSSM(R)- 50000/S | MSSM(R)- 60000/S | MSSM(R)- 80000/S | |
| Cooling capacity(KW) | 29.5 | 39 | 50.7 | 56.3 | 76.3 | |
| EER | 5.05 | 5.56 | 5.23 | 5.31 | 5.16 | |
| Cooling capacity(USRT) | 8.4 | 12 | 15 | 17 | 23 | |
| Heating capacity(KW) | 31.2 | 40.8 | 53.2 | 58.7 | 78.6 | |
| COP | 3.69 | 4.11 | 3.77 | 3.94 | 4.03 | |
| Heating capacity(USRT) | 8.5 | 11 | 13.6 | 15.3 | 20.4 | |
| Incoming cooling power(KW) | 5.84 | 7.02 | 9.7 | 10.6 | 14.8 | |
| Incoming heating power(KW) | 8.45 | 9.02 | 14.1 | 14.9 | 19.5 | |
| Electrical parameters (V/Ph/Hz) | 380~420/3/50 | |||||
| Incoming cooling current(A) | 11.2 | 12.5 | 17.6 | 18.9 | 25.8 | |
| Incoming current in the heating(A) | 14.9 | 17.3 | 24.9 | 25.6 | 35.4 | |
| Compressor type | Spiral | |||||
| Type of refrigerant | R410A | |||||
| Overall dimensions( L*W*H) (mm) | 1150×700×770 | 1150×700×960 | 1450×874×1302 | 1600×874×132 | 1500×1000×1450 | |
| Side of the heat source | Water resistance(kPa) | 65 | 70 | 85 | 85 | 90 |
| Pipe dimensions | R1-1/2(DN40) | R2(DN50) | R2-1/2(DN65) | |||
| Water consumption (m3h) | 6.3 | 8.7 | 10.9 | 12.5 | 17.2 | |
| Use side | Water resistance(kPa) | 34 | 35 | 45 | 45 | 55 |
| Pipe dimensions | R1-1/2(DN40) | R2(DN50) | R2-1/2(DN65) | |||
| Расход воды (m3h) | 5.1 | 7 | 8.9 | 10.1 | 13.9 | |
| Noise level dB(A) | 58 | 62 | 63 | 65 | 67 | |
| Weight (kg) | 280 | 300 | 420 | 450 | 700 | |
| Power wire | YZW 4×4+1×1.5 | YZW 4×6+1×4 | YZW 4×10+1×6 | |||
Attention:
- Cooling mode: the temperature of the cooling water at the inlet/outlet is 12℃/7℃; the water temperature at the inlet/outlet of the water loop is 30℃/35℃
- Heating mode: heated water inlet/outlet temperature 40℃/45℃; water temperature at the inlet/outlet of the water loop 10℃/9℃
- Menergy reserves the unique right to update the parameters, please refer to the sign
Server-Service is your reliable partner in creating a comfortable climate in your home, office or enterprise!
Contact us today to get advice and learn more about our services!
Contacts:
Telephone: +998 (71) 502 01 32, +998 (98) 128 42 00;
Telephone: +998 (71) 502 01 32,
Email: manager.serverservice@gmail.com
We will be happy to answer your questions!
Server-Service – New level service!